home   sitemap   about Pero   our addresses   fairs, events    contact/questionnaire   

deutsch    français    česky    po polsku    по-русски    

PERO "V4 Universal"

Cleaning with Hydrocarbon or Chlorinated Hydrocarbon Solvents

  • All tanks are conctanly under vacuum
  • Air or water cooled
  • Autom. operation using PLC technology
  • Indirect heating
  • Gentle distillation using vacuum
  • Residual distillation by vacuum
  • Safety pan below plant
  • Machine is compact and ready to run
  • Highest level of cleanliness

    • Technical Data of the cleaning machine "V4"

    basket size1.300 x 850 x 500 mm
    max. basket weight  650 kg
    output~ 3-4 baskets/h
    appr. cleaning time for steel (650 kg) (VDTrV-R): 15 min.
    (VVDTrV-R): 18 min.
    outside dimensions  width 7.020 mm
    length 2.940 mm
    height 3.550 mm
    loading height  ~ 1.010 mm
    solvent volume  ~ 2150 l bei VD
    ~ 3800 l bei VVD
    rate of distillation Per ~ 635 l/h
    KWL ~ 790 l/h

     

    We help you solve your toughest cleaning challenges

  • Each machine is filled with solvent and run at the factory prior to shipment
  • Conforms with relevant regulations, incl. the european standards for fire and explosion protection.(EN 1127-1:1997)
  • All US and European emission regulations are surpassed
  • Built to CE-standards to ensure safety compliance

    • Optional Equipment:

  • Automatic and manual conveyor systems
  • Ultrasonic system
  • Rinse- or rust inhibitor bath
  • PERO Gasphotometer
  • Baskets and palettes
  • Many other options available upon request

    • PERO reserves the right to change and/or improve machines to stay at the forefront of technology.

      PERO AG       View into our show-room


    The product information and technical data on our websites give a quick survey over our range of products.
    They are no request for buying. The information given on our websites is not sufficient as a decision for investment. Before deciding for a PERO installation, please contact one of our technical consultants to verify the suitability for your specific needs. In most cases test cycles with sample parts in one of our showrooms are necessary.

    Our websites support your search for a suitable machine. We are not liable for correct or complete contents, nor for the correctness of examples for application, opinions or other information you might find.
    We reserve the right to modify or not our websites at any time.

    home   sitemap   about Pero   our addresses   fairs, events    mail   

    deutsch    français    česky    po polsku    по-русски    

    imprint


    © PERO - version: 27.02.07